Please follow the video guide to install the 4G module:

After installation, please activate the SIM card by following the steps below:
1. Tap the signal status bar button on the device home page.
2. Toggle the “4G” switch (turn it on to activate).

1. Tap the signal status bar button on the device home page.

2. Toggle the “4G” switch (turn it on to activate).

1.Start New Mapping:
Option A: Tap "Start Mapping" on the homepage
Option B: Tap the device > Tap "Create Map"

2.Select Mapping Mode:
Manual Mapping: Suitable for complex environments. Use the joystick in the app to control the device along the lawn boundary. It is recommended to maintain a distance of 1.5 meters to ensure the path closely follows the actual boundary. Guide the device to complete a full loop so that the start and end points overlap.

Automatic Mapping: Suitable for neat, level lawns with clear boundaries and grass shorter than 10 cm (4 in). After mapping the first lawn, control the robot to the next lawn, turn the robot to face your desired mowing direction, and then tap "Mark". Once all zones are marked, tap "Start Mapping".

3.Complete Recording:
When the app prompts “Your lawn has been mapped successfully!,” tap “Finish.”

1. Go to the map page and tap "Map Editing" to enter the map editing page. To edit or delete a single element, go to the corresponding feature.
2. For example, if you want to delete a mowing Area, tap "Task Area". Then tap the area on the map to select it, and then delete it.

1. On the home page, tap your device to open the map page.
2. Tap the Map icon.
3. Tap "Map Editing":
   ---For iOS: Tap "Fine-tune Boundary";
   ---For Android: Tap "Task Area" > select the target area on the map > tap "Redraw Section".
   

1. Go to the map page and tap Start.
2. On the task preview page, tap the Settings icon.
3. You can adjust cutting height, mowing strategy, obstacle avoidance, mowing speed, and more.
4. For simpler setup, switch from Advanced Mode to Basic Mode.
5. When the preview looks good, slide to start mowing.

1. On the home page, swipe up to the second page and tap the "Next Task" card to open the Schedule page. If you haven't created any schedule, tap the Add Schedule card.
2. On the Schedule page, tap "New Task".
3. Select and confirm task areas to open the Task edit page.
4. Tap "Schedule", then choose the desired mowing time. You can select a specific date or set a fixed interval of days.
5. After selecting, save the task.
6. Confirm that the task status is Enabled.

1. Swipe up to the second page on the home page, then tap the Next Task card to open the Schedule page.
2. Select the task you want to modify.
3. Tap "Edit" to open the Task edit page.
4. Tap "Settings" to adjust the cutting height, mowing speed, and other preferences.
5. Return to the Task Edit page and save the changes.